OPERATOR'S STATION1-65Control Panel Designation and Function• Mode Switch (14):Selects the air vent. The selected air vent is indicated on LCD (7).Air flows out of front vent and the defroster vents.Air flows out of the front and rear vents and the defroster vents.Air flows out of the front and foot vents and the defroster vents.Air flows out of the foot vents.Each time mode switch (14) is pressed, the vent location can be changed in four stages as illustrated below.AUTO• When AUTO switch (9) is selected the AUTO, the air vent location is automatically selected.• Temperature Control Switch (11):Sets temperature in the cab from 18.0 to 32.0°C or 63 to 91°F) by 0.5°C or 1°F step. The set-temperature is displayed on LCD (7).• FC (Full-Cool) Push the button after setting air temperature to 18°C or 63°F. Air flow temperature is set to the lowest and the “FC” symbol is displayed on LCD (7).• FH (Full-Heat) Push the button after setting air temperature to 32°C or 91°F. Air flow temperature is set to the highest and the “FH” symbol is displayed on LCD (7).• When the AUTO indicator is ON, air temperature at the vents is automatically set together with the blower speed and vent locations.• When the AUTO indicator is OFF, only air temperature at the vents is automatically set.• When the “FC” symbol is displayed on LCD (7), air tem-perature at the vent, air vent (front and rear vents) loca-tions, recirculation air suction port, and blower speed are maintained at the lowest cooling conditions. However, in case the circulation indicator is ON before the “FC” symbol is displayed, circulation operation is maintained.M178-01-0747914Display when AUTO switch (9) is pressed:M178-01-075711Display when the button is pressed after displaying 25.0°C (77°F).M178-01-0767Display when the LCD displays FC symbol.AUTO Indicator