19Bobcat T40140with PlatformOperation and Maintenance ManualOPERATING INSTRUCTIONSAccumulator ChargerLocated in the handler cab, this charger can recharge one of the transmitter's two accumulators whilst the other one is in use.For installing or removing the accumulator, see [Figure 33].Figure 33Switch for driving mode and for the deactivation of the device to stop aggravating movements (SAM)This switch, located on the right-hand console in the cab, selects the machines driving mode, and in particular, the radio control mode when it is used as a PEMP. This switch is mounted on the telescopic handler, even if the tele-scopic handler is not equipped with the changes specific to its use as a PEMP, because it is being otherwise used. Refer to the relevant paragraphs in the manual of the cor-responding handler.Figure 34“Turned clockwise” is the stable position which must be selected to activate the radio control.WARNING• Only use guaranteed genuine accumulators.• Do not modify the connection of the accumula-tors.93898ReferenceDescriptionFunction1Middle position(stable position)Use of the machine with normal controls.2Turned clockwise(stable position)Use of the machine with remote control.3Turned counterclockwise(unstable position)Deactivation of the SAM device.IMPORTANT To insert or remove the key, the switch must be in a clockwise-turned position.12393727
